3 Repair Options to Choose From

Mail-In Repair

Most popular option. Place your repair order here, and you will receive a pre-paid mailing label to your email (USA Only). We will restore and test and send it back within a couple days.

Order MTC-12A Mail In Repair

DIY Repair Kit

For advanced technicians and installers, we will send you the replacement LCD touch screen repair kit to install yourself. Very similar to replacing a cell phone screen.

Order MTC-12A DIY Kit

MTC-12A Touch Screen LCD Replacement Repair for Delaminated 12" Medallion Viper 2 II Display- Malibu Scarab Sea Ray Monterey Four Winns

Refurbished Core Exchange

Order a refurbished display unit and send the old one back to us with a provided label. Easy and fast with no down time and no programming needed.

Order MTC-12A Refurbished

Medallion Viper 2 12" Screen Delamination Guide

3962064.1

Fix the "Watery Bubble" & Save Thousands.
Is your 12-inch Medallion display developing a bubble that looks like water or leaking clear glue under the glass? This is a common delamination failure that eventually leads to ghost touching and total screen failure. Instead of spending $5,000+ on a replacement unit, let MTC Screens restore yours.

Our Solution:
We install our brand new enhanced anti-delamination screen assembly to your existing display unit.

Eliminate Bubbles: Permanently fix the delamination separating the screen layers.
Restore Clarity: Remove LCD stripes, lines, and black spots.
Resolve Ghost Touching: Fix unresponsive dead zones and control issues.

Compatible with Medallion Viper 2 12-inch displays used in premium vehicles.

Cross Reference Part Numbers

Malibu	Monterey	Premier	Scarab	Sea Ray	Four Winns	Freightliner RV
6913-00551-01	60206085-00disp	6913-00562-01	6913-00509-01	024-0827	6913-00509-01	6913-00561-01
6913-00509-01		024-0827	6913-00562-01	6913-00509-01	120973	66-002439-000
6913-00512-01			024-0827	6913-00562-01
6913-00551-01
3962064
3962064.1
3962055.1

Fix the common issues

These are the most common issues we see on these 12 inch Medallion Viper 2 equipped boats and RV's. If you have a separate problem and want to make sure our fix will take care of it- send a chat message to confirm.

Delamination

This is a watery, glue leaking appearance that happens behind the glass. Common on high heat environments when the original bonding method is not durable enough.
Frozen touch

Sometimes one section or perhaps the entire screen becomes unresponsive or frozen when you try to activate buttons. Sometimes the touch is inaccurate.

Customers before Medallion Viper II 12 inch Repairs

See more in the gallery

Check out this recent customer repair

This customer has a 2018 Sea Ray boat. The screen was fully delaminated, and he could not activate the blower, radio, or settings buttons on the screen. The dealer quoted $5980 plus taxes and installation. We were able to fully restore his screen at a fraction of the price, savings over $4000 compared to buying new!

Before

After

Video description of our repair process

Check out this video of a recent customer job, showing the before and after test results.

Save More

Example of new unit from online parts dealer

No need to spend $5,8000 or more on a new display unit, only to have the same old design! Upgrade your display with our improved screens and never worry about it again.

Updated Anti-Delamination Design

Our special bonding method will resist delamination in boating conditions.

Sunlight Readable

We design the cover glass to be ideal for sunny, outdoor boating conditions.

Polarized Sunglasses Compatible

Our film is compatible with most of the popular polarized sunglasses.

Anti-Fingerprint Coating

Our top film prevents water drop staining and fingerprints.

Enhanced LED Driver

Our proprietary design results in improved brightness and easier viewing in sunny conditions.

VHB Tape Included

For a watertight seal to your original housing, our screens come with pre-installed tape.

Common Questions

Answer common questions with the collapsible content section.

Is mtc design better than the original?

Our design is our proprietary anti-delamination design, and should not suffer from the common issues. In addition, we use a durable LED backlight that is brighter than the original. Finally, we add a nice anti-fingerprint coating that resists water spots and fingerprints.

How to remove from the boat?

Varies depending on the boat. Check behind the screen, remove the network plug, and see how it is fastened to the dash.

Is there any programming?

No. With all repair options, all of your settings remain the same. For refurbihsed units, you can change your controls under the switch- setup menu.

How do I know this will fix my issue?

Check the list of common issues on this page, if you are experiencing one or more of them, our new screen is guaranteed to resolve it.

Why is this so much lower cost than buying a new unit?

When you buy a new unit, you are buying a lot of additional components like the wiring harness, boards, housings, that all do not need to be replaced. We focus on replacing only the parts that have failed to reduce costs.