Medallion Viper 2 12 inch Delamination Screen Repair Information Guide

3962064.1

Fix the "Watery Bubble" & Save Thousands.
Is your 12-inch Medallion display developing a bubble that looks like water or leaking clear glue under the glass? This is a common delamination failure that eventually leads to "ghost touching" and total screen failure. Instead of spending $5,000+ on a replacement unit, let MTC Screens restore yours.

The MTC Repair Promise:
We don't just patch the unit; we install our brand new enhanced anti-delamination screen assembly to your existing display unit.

  • Eliminate Bubbles: We permanently fix the delamination separating the screen layers.
  • Restore Clarity: We remove LCD stripes, lines, and black spots.
  • Precise Control: We resolve ghost touching and unresponsive dead zones.

Compatible Vehicles:
This unit is used in a wide variety of high-end vehicles, including Malibu, Sea Ray, Monterey, Scarab, Four Winns, Ranger, Premier Pontoons, and Freightliner RV/Commercial chassis.

Continue reading below for more information and our available repair options.

Cross Reference Part Numbers

Malibu Monterey Premier  Scarab Sea Ray Four Winns Freightliner RV
6913-00551-01 60206085-00disp 6913-00562-01 6913-00509-01 024-0827 6913-00509-01 6913-00561-01
6913-00509-01
024-0827

6913-00562-01 6913-00509-01 120973 66-002439-000
6913-00512-01

024-0827 6913-00562-01

6913-00551-01





3962064





3962064.1





3962055.1





Fix the common issues

These are the most common issues we see on these 12 inch Medallion Viper 2 equipped boats and RV's. If you have a separate problem and want to make sure our fix will take care of it- send a chat message to confirm.

  • MTC-12A Touch Screen LCD Replacement Repair for Delaminated 12" Medallion Viper 2 II Display- Malibu Scarab Sea Ray Monterey Four Winns

    Delamination

    This is a watery, glue leaking appearance that happens behind the glass. Common on high heat environments when the original bonding method is not durable enough.

  • MTC-12A Touch Screen LCD Replacement Repair for Delaminated 12" Medallion Viper 2 II Display- Malibu Scarab Sea Ray Monterey Four Winns

    Frozen touch

    Sometimes one section or perhaps the entire screen becomes unresponsive or frozen when you try to activate buttons. Sometimes the touch is inaccurate.

1 of 2

Check out this recent customer repair

This customer has a 2018 Sea Ray boat. The screen was fully delaminated, and he could not activate the blower, radio, or settings buttons on the screen. The dealer quoted $5980 plus taxes and installation. We were able to fully restore his screen at a fraction of the price, savings over $4000 compared to buying new!


Load video:

Video description of our repair process

Check out this video of a recent customer job, showing the before and after test results.

Save More

Example of new unit from online parts dealer

No need to spend $5,8000 or more on a new display unit, only to have the same old design! Upgrade your display with our improved screens and never worry about it again.

3 Repair Options to Choose From

mtc screens mail in repair service

Mail-In Repair

Most popular option. Place your repair order here, and you will receive a pre-paid mailing label to your email (USA Only). We will restore and test and send it back within a couple days.


DIY Repair Kit

For advanced technicians and installers, we will send you the replacement LCD touch screen repair kit to install yourself. Very similar to replacing a cell phone screen.

MTC-12A Touch Screen LCD Replacement Repair for Delaminated 12" Medallion Viper 2 II Display- Malibu Scarab Sea Ray Monterey Four Winns

Refurbished Core Exchange

Order a refurbished display unit and send the old one back to us with a provided label. Easy and fast with no down time and no programming needed.

Is mtc design better than the original?

Our design is our proprietary anti-delamination design, and should not suffer from the common issues. In addition, we use a durable LED backlight that is brighter than the original. Finally, we add a nice anti-fingerprint coating that resists water spots and fingerprints.

How to remove from the boat?

Varies depending on the boat. Check behind the screen, remove the network plug, and see how it is fastened to the dash.

Is there any programming?

No. With all repair options, all of your settings remain the same. For refurbihsed units, you can change your controls under the switch- setup menu.

How do I know this will fix my issue?

Check the list of common issues on this page, if you are experiencing one or more of them, our new screen is guaranteed to resolve it.

Why is this so much lower cost than buying a new unit?

When you buy a new unit, you are buying a lot of additional components like the wiring harness, boards, housings, that all do not need to be replaced. We focus on replacing only the parts that have failed to reduce costs.