Johnson Evinrude ICON Pro Series Gauge LCD Restoration

Mail-In LCD Replacement for Evinrude / Johnson ICON Pro Series Tachometers and Speedometers

Can't read your ICON Pro gauge in the sun anymore? The Faria-built ICON Pro Series tachometers and speedometers used with Evinrude E-TEC outboards have an LCD window that tends to fade, darken and burn out after years of direct UV exposure. Ship us your gauge and we replace the defective OEM LCD with a brand new, high-contrast LCD using brand new parts, bench test it, and send it back ready to plug in. • Fits 3.5" and 5" ICON Pro tachometers and speedometers, black or white dial • Brand new LCD installed in your original gauge • Your circuit board, housing, dial, needle and settings stay with your gauge • Turnaround of 3 days or less • A fraction of the cost of a new gauge, if you can still find one

Compatible Part Numbers

ICON Pro Tachometers (RPM): 766161 / 0766161 (3.5" Black) • 766184 / 0766184 (3.5" White) • 766162 / 0766162 (5" Black) • 766185 / 0766185 (5" White) • 768007 / 0768007 (Black Tachometer Kit, replaces 766161)

ICON Pro Speedometers: 766168 / 0766168 (3.5" 80 MPH Black) • 766167 / 0766167 (3.5" 50 MPH Black) • 766191 / 0766191 (3.5" 80 MPH White) • 766190 / 0766190 (3.5" 50 MPH White) • 766170 / 0766170 (5" 80 MPH Black) • 766169 / 0766169 (5" 50 MPH Black) • 766193 / 0766193 (5" 80 MPH White) • 766192 / 0766192 (5" 50 MPH White) • 768051 / 0768051 (80 MPH Black Speedometer Kit) • 768055 / 0768055 (80 MPH Speedometer Kit) • 766648 (130 KPH White)

Don't see your number? It is printed on the label on the back of the gauge. Send it to us and we'll confirm compatibility before you ship.

Applicable Models

• Evinrude E-TEC outboards from 40 hp through 300 hp rigged with ICON Pro Series gauges • Boats with Evinrude ICON electronic shift and throttle • Single and multi-engine setups (tachometer and matching speedometer) • Found on Boston Whaler, Tidewater and many other boats with E-TEC power • ICON Pro gauges branded Evinrude, Johnson or BRP and manufactured by Faria

Common Issues Fixed

Sun faded or UV burned LCD • LCD turning dark, black or purple in direct sunlight • Low contrast that the contrast setting can't correct • Faint, fading or missing characters • Missing segments, lines or rows of pixels • Engine hours, fuel, trip and fault messages you can no longer read • Needle still works but the LCD window is unreadable

How the Mail-In Service Works

Check out to receive your shipping instructions by email • USA customers: Receive a prepaid UPS shipping label via email • Unplug the harness and remove the gauge from your dash • Pack and ship your gauge using the provided label • We replace the faded or sunburned LCD with brand new parts and bench test the gauge • Turnaround of 3 days or less • We ship your gauge back to you • Plug it back in, with no reprogramming needed in most cases • International customers: Follow email instructions to ship to our US facility

What's Included

Brand new LCD installed in your gauge • Full display, contrast and backlight test before it ships • Original circuit board, housing and dial reused, so your gauge keeps its look and setup • Return shipping • Warranty on our work

Why Choose MTC Screens Mail-In Service

Many ICON Pro part numbers are discontinued and hard to find new • Replacement gauges commonly sell for $600 to $700+ each, per gauge • Keep your original matched tach and speedometer set • Turnaround of 3 days or less • Marine display specialists based in Fort Myers, FL • Trusted by hundreds of satisfied boaters

Note

This service replaces the LCD in your ICON Pro gauge. If your gauge also has a cracked lens, water inside, no power, or no data, contact us before shipping so we can check whether it can be repaired.