2021 yamaha connext 4.3 inch frozen unresponsive touch screen

Yamaha Connext 4.3 inch (Activision430) Screen Repair Information Guide

Is your Yamaha Connext display failing to respond? Don't spend over $1,000 on a dealer replacement. At MTC Screens, we specialize in refurbishing your existing unit to function better than new for a fraction of the cost. These units are also referred to as the ActiVision430.

Common Symptoms We Fix:

  • Frozen or completely unresponsive touch capabilities.
  • Dead zones (left or right side unresponsive).
  • Top or bottom rows failing to register input.

Supported Models (2018 & Newer):
This repair service covers the 4.3" display units found in many Yamaha Boats and WaveRunners, including:

  • 190 Series: 190 FSH, SX190, AR190
  • 195 Series: SX195, AR195
  • 210 Series: 210 FSH, SX210, AR210
  • WaveRunners: FX Series

Restore your boat's functionality today with our expert refurbishment service.

Continue reading below for more information and our available repair options.

Fix the common issues

These are the most common issues we see on these Yamaha Connext 4.3 inch systems. If you have a separate problem and want to make sure our fix will take care of it- send a chat message to confirm.

  • Frozen touch

    This is when you press zones and nothing happens. It seems like it is not reacting.

  • 2021 yamaha connext 4.3 inch frozen unresponsive touch screen

    Unresponsive

    We commonly see zones or sections that are not reactive. For example, the entire right half or top half not responding.

  • Peeling Delamination

    Commonly the black mask will peel away from the glass, leaving a bubble around the edge.

  • LCD Defects

    When the LCD fails, there can be stripes, random colors, or other visual defects.

Customers before Yamaha Connext 4.3 Repairs

See more in the gallery
  • Yamaha 4.3 inch connext peeling LCD

Video summary of our repair process

DIY Removal and Screen Installation video to fix the common frozen touch issues on Yamaha Connext 4.3 inch

Load video: 2018 2019 2020 Yamaha connext frozen touch screen repair process 4.3 inch

Save More

Example of new unit from online parts dealer

No need to spend $1,000 or more on a new display unit, only to have the same old design! Upgrade your display with our improved screens and never worry about it again.

Updated Anti-Delamination Design

Our special bonding method will resist delamination in boating conditions.

Sunlight Readable

We design the cover glass to be ideal for sunny, outdoor boating conditions.

Polarized Sunglasses Compatible

Our film is compatible with most of the popular polarized sunglasses.

Anti-Fingerprint Coating

Our top film prevents water drop staining and fingerprints.

Enhanced LED Driver

Our proprietary design results in improved brightness and easier viewing in sunny conditions.

VHB Tape Included

For a watertight seal to your original housing, you can use RTV silicone for a perfect seal.

2 Repair Options to Choose From

mtc screens mail in repair service

Mail-In Repair

Most popular option. Place your repair order here, and you will receive a pre-paid mailing label to your email (USA Only). We will restore and test and send it back within a couple days.

Order 4.3 Mail In repair
Medallion Malibu touch screen delamination viper 2 3737082 3962085.1 6913-00535-01 6913-00549-01

DIY Repair Kit

For advanced technicians and installers, we will send you the replacement LCD touch screen repair kit to install yourself. Very similar to replacing a cell phone screen.

Order 4.3 DIY Kit

Is mtc design better than the original?

Our design is our proprietary anti-delamination design, and should not suffer from the common issues. In addition, we use a durable LED backlight that is brighter than the original. Finally, we add a nice anti-fingerprint coating that resists water spots and fingerprints.

How to remove from the boat?

Check behind the screen, remove the 4 nuts. Disconnect the plug. The screen comes out from the front

Is there any programming?

No. With all repair options, all of your settings remain the same. For refurbihsed units, you can change your controls under the switch- setup menu.

How do I know this will fix my issue?

Check the list of common issues on this page, if you are experiencing one or more of them, our new screen is guaranteed to resolve it.

Why is this so much lower cost than buying a new unit?

When you buy a new unit, you are buying a lot of additional components like the wiring harness, boards, housings, that all do not need to be replaced. We focus on replacing only the parts that have failed to reduce costs.

How do I know if I have version 1 or 2?

At this point, we know there are two different types of screens used on these units. We know that you have to match your version of screen with the new screen you order from us, otherwise it will not work. Currently the only known method is to open your existing display and check the cables to confirm before ordering. Eventually we may be able to match based on part numbers.