As a Tige boat owner with a 2011-2014 Touch 1 system, you have probably experienced this scenario: You head out for a perfect day on the lake, only to discover a mysterious water-filled bubble spreading across your command center screen. What starts as an eyesore quickly becomes a serious problem when your display starts acting possessed.

The ballast controls stop responding. Your audio system has a mind of its own. Before long, the entire touch interface becomes completely unusable.

This is not an isolated incident. Screen delamination is the number one failure mode for Tige Touch 1 systems equipped with the 6.5" Medallion display (Tige part numbers: Z-C2003, 6913-00358-01, 6913-00372-01).

Classic delamination on a Tige Touch 1 display. The "bubble" indicates adhesive failure between layers.

The Root Cause of Tige Screen Delamination

This is not a random defect - it is a design flaw.

Medallion, the manufacturer of these displays, relied on liquid optical adhesive (LOCA) to laminate the touch digitizer to the LCD panel. This approach works fine in climate-controlled environments, but fails catastrophically in the punishing conditions of marine use.

"The combination of intense heat, constant humidity, and relentless UV radiation breaks down the liquid adhesive. As it degrades, it liquefies and migrates, forming bubbles and destroying touch sensitivity."

When this adhesive layer fails, your touch inputs become erratic or stop working entirely - resulting in the infamous "Ghost Touch" phenomenon where the screen registers phantom inputs.

Why Dealer Replacement Is Not the Answer

Contact your Tige dealer about this issue, and they will typically offer only one solution: complete unit replacement. Consider what this actually means:

• Massive Cost: Expect to pay anywhere from $3,500 to over $5,000.
• Unnecessary Waste: The electronics, processor, and enclosure are all functioning perfectly - only the bonded glass assembly has failed.
• Same Problem, Different Day: Most replacement units use identical adhesive technology, meaning you are likely to face the same failure again.

How MTC Screens Solves This Permanently

At MTC Screens, we take a different approach. Rather than simply swapping parts, we address the fundamental engineering flaw.

Our upgraded displays utilize Dry Optical Bonding (OCA) technology with advanced materials engineered specifically for marine environments. These components are tested against saltwater exposure, UV degradation, and temperature extremes. The result? We have eliminated the root cause of failure.

After repair: Enhanced brightness, superior clarity, and bubble-free performance that lasts.

Three Repair Options to Fit Your Needs

Our service covers all Tige Touch 1 systems from 2011-2014 with 6.5" Medallion displays. Compatible part numbers include Z-C2003, 6913-00358-01, and 6913-00372-01. Select the option that works best for you:

1. Professional Mail-In Service (Customer Favorite)

Prefer to leave it to the experts? Simply unbolt your display (typically 4 fasteners), send it our way, and we will handle everything. Our technicians will install the upgraded screen, perform full testing, and return it to you within 3-5 business days.

2. Do-It-Yourself Repair Kit

Comfortable working with your hands? Maximize your savings with our DIY solution. You will receive the premium replacement screen plus detailed video instructions. Most customers complete the installation in under an hour - and save thousands compared to dealer pricing.

3. Ready-to-Install Refurbished Unit

Cannot afford any downtime? Order a completely refurbished display today. Swap it in, return your failed unit in the same packaging, and receive a core credit. It is that simple.

SHOP TIGE SCREEN REPAIRS

A failed screen should not sideline your boat for the season. Thousands of Tige owners have already made the permanent fix with MTC Screens.