Couldn't load pickup availability
For mail-in repair service customers: place the order here, and we will invoice you before shipping back. Terms and conditions apply.
Sunlight Readable
Polarized Glasses Compatible
Originally manufactured by Enovation Controls. Compatible with: • Nautique LINC Panoray 12.3" (170118 / 170118A) • Centurion • South Bay • Trifecta • Mastercraft (Skinny Pete) Non Touch Version 501300030 • Yamaha Connext 12" (HV1200 TCS) • Supra •
• Digitizer delamination — bubbles around screen edges • Silk screen delamination — peeling/bubbling border (water ingress risk) • Graphics issues — stripes, blackout, or incorrect colors • Touch fully frozen or unresponsive • Top or bottom ⅓ of screen frozen • Dead zones across the screen • "Acknowledge All" button stuck and unpressable
We remove the defective LCD and touch panel and install our updated proprietary design — reusing your good board and housing. No programming or dealer visit required. Save over $3,000 vs. full replacement.
Order the mail-in repair service or DIY kit. You'll receive a prepaid shipping label (USA) or follow our shipping instructions. We repair, test, and return within a few days.
SP700TWFJ • PV1200 • PV1200-TC • PV1200-T • PV1200-TCS • HV1200 • HV1200-TCS • PV1200-TCLS • F5K-U8K12-00 • 78700624 • 78700633 • 78700619
Important Note for 2017 Nautique owners- you must have JL audio or Polk audio LINC software from 2020 or newer. Contact us for more details to confirm.
This display was used on many boats starting in 2017, and used all the way through 2025. We can fix all the common defects with our professional mail in repair service or DIY repair kit, allowing you to repair instead of replace the entire display.
Our PV1200 Mail in repair service and DIY kit fix all the known issues permanently.
Frozen or unresponsive touch buttons in certain areas of the screen. This can be the bottom inch, the top inch, or the middle section unresponsive or "dead zones." Other times we see the entire devices unresponsive.
This is the same as frozen touch, but when you try to press acknowledge all, nothing happens. Therefore you are stuck on this page forever.
We commonly see lines, stripes, bad colors, and many other issues related to the LCD failure. Our replacement service solves all of these issues.
This issue is due to the silk screen separating from the glass. Once you see this, it is important to get it fixed as soon as possible. Not only is it a cosmetic defect, it is a water and condensation entry point that will lead to total board failure.
EXCLUSIVE PROPRIETARY DESIGN
Our improved bonding method will ressist the common delamination that occurs in the harsh boating environment. Vibration, UV, heat all contribute to the OEM screen failing.
EXCLUSIVE PROPRIETARY DESIGN
Our custom designed screen uses a matte, soft finish that allows for smooth touch, anti-water spot, and anti glare. This results in a superior interface control while focusing on driving.
This video is an actual repair completed for another customer, so you can know what to expect with our professional services.
Example of new unit from online parts dealer
No need to spend $4,500 or more on a new display unit, only to have the same old design! Let us rebuild and upgrade your display with our improved screens and never worry about it again.
The custom new LCD ensures there is no risk of obsolesence like the original CCFL LCD.
Our anti-delamination bonded digitizer ensures this is a "one and done" fix. All brand new updated parts only- we don't rebond old parts.
Our custom finished glass uses anti-fingerprint technology and resists water spots.
We use new wiring to match the new components to the reused motherboard.
Display Removal Guide
Select your boat model to view step-by-step removal instructions
