MTC-6C Plastic Lens Replacement 6.5" Medallion LCD Maliview and Maristar NON-Touch Viper BIG display
These older non-touch displays have several design issues that start to show up after about 5-8 years in use. The clear lens can become discolored, scratched, cracked, hazed, and faded.
However, there is no need to replace the entire unit.
You can replace just that plastic lens with our UV protected, anti glare, custom designed lens and have your display looking like new.
For DIY option- simply watch the installation video for the MTC-6C on the installation page. You will need to remove the old glue and sealant and scrape away the old lens, then put a bead of RTV silcone down and place the new lens into position. When it dries, reassemble.
Or choose the mail in service and we can install it for you for an additional $100.
This will result in your display looking better than new, no programming needed, and without having to spend $6,000 on a new one from the dealer.
How it works (Mail-In Service):
Upon checkout, you will receive a UPS pre-paid mailing label sent to your email. Print it out, remove your unit as shown in the video on the installation page. Carefully package it, attach the label, and drop it off at any UPS store or UPS center.
We will fix it and send it back within 3-5 business days. It is highly recommended to double check your address.
New parts included in the repair process:
UV protected anti glare lens
Factory spec bright LCD panel
Updated backlight inverter
Warranty:
3 Year warranty on the rebuild service.
Compatible 6.5” Unit Part Numbers (known versions, could be more):
6913-00394-01
693-00363-01
3962002
3962032.1
6913-00385-01 2014 Wakesetter VTX
Manufacturer Compatibility:
Based on our research, there are 2009-2016 vessels that utilize the 6.5” Medallion Big Display
The manufacturers could include Ski Nautique, Malibu, Mastercraft, Tige, Chapparal, Sea-Doo and others.
Feel free to send a photo of the front and back of your specific unit to confirm if we can fix it.
